Advanced Motion.NET PCI Master Card
¡@¡@¡@¡@¡@¡@¡@¡@ with 4-Axes Motion Control Card
PCI-M314
Features
¡EMax. 3.2MHz, 4-Axes pulse output
¡ELinear, circular,Helix and continuous interpolation
¡EHigh speed position latch function
¡ESimultaneously start/stop on multiple  axes
¡EProgrammable acceleration and deceleration time
¡EProgrammable pulse output and interrupt
¡EPosition compare and trigger output
¡ESCSI 100pins connector interface
¡@
Specifications
    Motion Control
  ¡EPulse output mode: OUT/DIR, CW/CCW,AB Phase
  ¡EPulse output rate: Max. 3.2Mpps
  ¡EPosition range: 32bits(¡Ó2147483648 pulses)
  ¡EHome return mode: 6 types
  ¡EVelocity profiles: T-curve, S-curve
  ¡EInterpolation mode: linear, circular and continuous,Helix and continuouse
  ¡ECounter for encoder feedback signals: 32bits up/down x 4
  ¡EPosition latch input: LTC x 4
  ¡EPosition compare output: CMP x2
  ¡EIncremental encoder input: ¡ÓEA x 4, ¡ÓEB x 4
  ¡EEncoder index signal input: ¡ÓEZ x 4
  ¡EMachine interface: PEL x 4, MEL x 4, ORG x 4, SLD x 4
  ¡EServo driver interface: ALM x 4, RDY x 4, SVON x 4, INP x 4,
¡@  ERC x 4
  ¡EGeneral input: IN x 4
  ¡EGeneral output: OUT x 4
  ¡EI/O pin type: optically isolated with 2.5KVrms on all SCSI 100 pins
    Motion.NET
  ¡ENumber of Ring: 1
  ¡ESerial interface: half duplex RS-485 with transformer isolation
  ¡ECable type: CAT5 UTP/STP Ethernet cable
  ¡ESurge protection: 10KV
  ¡ETransmission speed: 2.5Mbps ,5Mbps, 10Mbps and 20Mbps
  ¡EData flow control : automatic
  ¡ECommunication distance: Max. 100m (20Mbps/32 slave module)
  ¡ESlave module function: digital I/O slave module
    General
  ¡EPCI Spec. 2.2; supports 32-bit, 3.3V/5V DC operation
  ¡EPower consumption: +5V DC at 0.5A typical
  ¡EWorking temperature: 0 to 60¢J
¡@
Software Supporting
¡EWindows 2000/XP WDM driver
¡@Support BCB/VB/VC++ programming on Windows 2000/XP platform with DLL
¡EMotionNAVI
¡@MotionNAVI is a Windows utility assists the customer to debug